Open as PDF
Safety Instructions & Operator’s Manual for
21” STEEL DECK
MODEL NUMBER EXPLANATION
E M R P 21 65 18 B
EUROPEAN MODEL ENGINE DESIGNATION
MODEL DESIGNATION SERIES DESIGNATION
RECYCLING MODEL ENGINE HORSE POWER *
SELF-PROPELLED CUTTING WIDTH
E – European Model P – Self Propelled Model 18 - Series Designation
M – Model Designation R – Recycling Model B – Briggs & Stratton
21 – 21” Cutting Width
65 – 6.5 HP (Engine Horse Power)
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2004
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
MANUAL No. 2-9759 (I.R. 8/11/04)