Filter
Top Products
17
Recording/Playback
Name and functions of each part
Buttons, jacks, etc., which are not explained
in other chapters, are explained here.
A Flash
The flash will flash automatically
depending on recording conditions in the
default setting.
Touch (HOME) t (SETTINGS)
t [PHOTO SETTINGS] t [FLASH
MODE] to change the setting.
B Speaker
C QUICK ON lamp
Flashes during sleep mode. When you open
the LCD panel while the QUICK ON lamp
is flashing, you can start recording in about
1 second (QUICK ON).
The flashing stops and the power turns off
automatically if you do not operate your
camcorder for a certain period during sleep
mode ([QUICK ON STBY], p. 22).
D Power zoom lever
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
You can magnify still images from about
1.1 to 5 times the original size (Playback
zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the LCD screen.
E RESET button
Press RESET to initialize all the settings
including the clock setting.
F EASY button
Press EASY to display and most of
the settings are set automatically for easy
recording/playback. To cancel, press EASY
again.
Handycam Station
Recording/Playback