Filter
Top Products
42
To name the picture profile settings
You can name picture profile1 through 6.
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile that you want
to name with the SEL/PUSH EXEC dial
A.
3 Select [SETTING] t [PROFILE
NAME] with the SEL/PUSH EXEC dial
A.
4 Select a letter with the SEL/PUSH
EXEC dial A. Repeat this operation
until a complete name is entered.
z Tips
• Each name can be up to 12 characters long.
Characters that can be used in profile
names:
•A to Z
•0 to 9
• - _ / # & : . @
5 Select [OK] with the SEL/PUSH EXEC
dial A.
The profile name is changed.
6 Select [ RETURN] t [OK] with
the SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile that you want
to copy from with the SEL/PUSH
EXEC dial A.
3 Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
5 Select [YES] with the SEL/PUSH
EXEC dial A.
6 Select [ RETURN] t [OK] with the
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
B.
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [RESET] t
[YES] t [
RETURN] t [OK]
with the SEL/PUSH EXEC dial A.
You can adjust the volume of the stereo
internal microphone or an external
microphone connected to the MIC jack.
CANCEL
OK
PICTURE PROFILE END
PICT. PROFILE
Adjusting the volume
BAC
Changing the settings of your camcorder recordings (Continued)