Filter
Top Products
45
Recording/Playback
5 Select [OK] with the SEL/PUSH
EXEC dial A.
6 Press the MENU button B to hide
the menu screen.
z Tips
• Shot transition is assigned to the ASSIGN 4, 5
and 6 buttons
(p. 46). Cancel the shot transition
assignment to return to the pre-setting
assignment.
• To cancel the shot transition, select [SHOT
TRANSITION] t [YES] in step 3.
If you record a scene with an index signal,
you can easily find that scene during play
back
(p. 55).
The index function will make it easier to
check the transition of recording or edit
your pictures using index signals.
1 Assign [INDEX MARK] to one of
the ASSIGN buttons (
p. 44).
2 Press the ASSIGN button to
which [INDEX MARK] is assigned.
During recording
appears for about 7 seconds and an
index signal is recorded.
During standby
flashes.
After you press the REC START/STOP
button to start recording,
appears
for about 7 seconds and an index signal
is recorded.
To cancel the operation
Press the ASSIGN button to which [INDEX
MARK] is assigned again before you start
recording.
b Notes
• You cannot record an index signal on a recorded
tape afterward.
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
This is convenient during playback of the
latest scene check.
1 Assign [REC REVIEW] to one of
the ASSIGN buttons.
(p. 44).
2 Press the ASSIGN button to
which [REC REVIEW] is assigned
during standby.
The last 2 seconds (approx.) of the most
recently recorded scene will be played
back, then your camcorder returns to
standby.
1 Assign [END SEARCH] to one of
the ASSIGN buttons
(p. 44).
Recording an index signal
Reviewing the most recently
recorded scenes (Rec review)
Searching for the last scene of
the most recent recording
(End search)
Continued ,