Sony A390 Camcorder User Manual


 
156
Dots appear and remain on the LCD monitor.
This is not a malfunction. These dots are not recorded (page 7).
You may reduce the effect of these issues using the “Pixel mapping”
function.
1 Set the LIVE VIEW/OVF switch to “LIVE VIEW.”
2 Attach the lens cap.
3 MENU button t 3 t [Pixel mapping] t [OK]
The image is blurred.
The picture was taken in a dark location without the flash, resulting in
camera shake. The use of a tripod or the flash is recommended (pages 46,
82).
The EV scale b B is flashing on the LCD monitor or in the viewfinder.
The subject is too bright or too dark for the metering range of the camera.
The color of an image recorded in Live View mode is strange.
In Live View mode, carefully check the image displayed on the LCD
monitor before shooting. The camera may not be able to recognize the color
of the image right after switching to the Live View mode. In such cases, the
expected result may not be obtained.
Your camera cannot play back images.
The folder/file name has been changed on your computer (page 135).
When an image file has been processed by a computer or when the image
file was recorded using a model other than that of your camera, playback on
your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (page 133).
The image does not appear on the TV screen.
Check whether the connection is correct (page 112).
Your camera cannot delete an image.
Cancel the protection (page 109).
Viewing images
Deleting/Editing images