Filter
Top Products
66
Symptom Cause and/or Corrective Actions
c Charge the battery pack fully again so that the indication on
the battery remaining indicator is correct.
• The power source is disconnected.
c Connect it firmly. (p. 12, 17)
• The battery is dead.
c Use a charged battery pack. (p. 12, 13)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 75)
Others
Symptom Cause and/or Corrective Actions
• Reset the date and time. (p. 58)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 75)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate your
camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 13)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony service
facility.
The % and Z indicators flash and no
functions except for cassette ejection
work.
The cassette cannot be removed from
the holder.
Troubleshooting
The melody or beep sounds for 5
seconds.
The date or time indicator does not
appear, and the bars “--:--:--” appear.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
The power goes off although the
battery remaining indicator indicates
that the battery pack has enough
power to operate.