Sony CCD-TR748E Camcorder User Manual


 
101
Additional Information Aanvullende informatie
Betreffende het InfoLITHIUM
batterijpak
Aanduiding van de resterende
batterijspanning
Wanneer het toestel uitschakelt terwijl de
batterijrestladingsindicator aangeeft dat het
batterijpak nog voldoende stroom levert, moet
u het batterijpak opnieuw volledig opladen
zodat de resterende batterijspanning correct
wordt aangegeven. Merk evenwel op dat de
juiste indicatie niet wordt hersteld bij langdurig
gebruik in een zeer warme omgeving, en
wanneer het batterijpak lang volledig
opgeladen blijft of vaak wordt gebruikt. De
aangegeven restbatterijlading geldt bij
benadering.
E geeft aan dat er weinig batterijspanning rest
en knippert soms afhankelijk van de
werkingsomstandigheden of de
omgevingstemperatuur, ook al is de resterende
batterijlading nog goed voor ongeveer 5 tot
10 minuten.
Het batterijpak bewaren
Wanneer het batterijpak gedurende langere tijd
niet wordt gebruikt, volgt u de onderstaande
procedure minstens eenmaal per jaar om het in
goede conditie te houden.
1. Laad de batterij volledig op.
2. Laat ze ontladen op uw camcorder.
3. Haal de batterij uit uw camcorder en bewaar
ze op een droge, koele plaats.
Om het batterijpak op uw camcorder te
ontladen, laat u uw camcorder in de CAMERA
(standby) stand tot hij uitschakelt zonder dat
een cassette is ingebracht.
Batterijlevensduur
De levensduur van de batterij is beperkt. De
batterijcapaciteit neemt na verloop van tijd af.
Wanneer de batterij heel snel uitgeput raakt, is
ze wellicht versleten. Koop dan een nieuw
batterijpak.
De levensduur van de batterij wordt bepaald
door de opslag- en werkingsomstandigheden.
About the InfoLITHIUM battery
pack
Remaining battery time indicator
If the power goes off although the remaining
battery time indicator indicates that the battery
pack has enough power to operate, charge the
battery pack fully again so that the indication
on the remaining battery time indicator is
correct. Note, however, that the correct battery
indication sometimes will not be restored if it is
used in high temperatures for a long time or left
in a fully charged state, or the battery pack is
frequently used. Regard the remaining battery
time indication as approximate.
The E mark, indicating there is little remaining
battery time, sometimes flashes depending on
the operating conditions or ambient
temperature and environment even if the
remaining battery time is 5 to 10 minutes.
How to store the battery pack
If the battery pack is not used for a long time,
do the following procedure once a year to
maintain proper function.
1. Fully charge the battery.
2. Discharge on your camcorder.
3. Remove the battery pack from your
camcorder and store it in a dry, cool place.
To discharge the battery pack on your
camcorder, leave your camcorder in CAMERA
(standby) mode without a cassette inserted
until the power goes off.
Battery life
The battery life is limited. Battery capacity
drops little by little as you use it more and
more, and as time passes. When the available
battery time is shortened considerably, a
probable cause is that the battery pack has
reached the end of its life. Please buy a new
battery pack.
The battery life varies according to storage and
operating conditions, and environment for each
battery pack.