Filter
Top Products
40
MULTIPLEXERS
•Full duplex video multiplexer with up to 16 camera inputs
•Either asynchronous or synchronous cameras can be
connected
•Multiplex recording to one VCR while switching between
each camera by a field (1/50 sec.) for precise surveillance
of multiple points
•Long time recording with Time Lapse VCR
•Video loop through for up to 16 cameras
• Live pictures can be displayed in full screen, sequence,
quad, multi-screen (7/10/13/16) while simultaneously
recording
•Auto sequential switching in quad mode in addition to full
screen sequence switching
•Recorded images can be played back in the bottom right
screen of the 13 or 16-picture display simultaneously with
live images
•Playback can be reviewed in full screen, sequence, quad,
and multi-screen (7/10/13/16)
•Live images can be displayed in the bottom right screen of
the 13 or 16-picture display simultaneously with
recorded images
•MONITOR 2 can be used for spot monitoring
•Freeze picture function in both live and playback mode
•Electronic zoom (x2) function in both live and play back
mode
•An S-VHS VCR can be connected via the S-video
output/input connector (YS-DX316P only)
•Built in time/date and camera title generator
•Easy on screen setup
•16 alarm inputs, each corresponding to a camera input
•Programmable freeze, zoom and buzzer functions in
16-picture split mode for alarm inputs
•Alarm monitor function automatically provides independent
monitoring of channels in which alarms occur on
MONITOR 2
•Programmable alarm recording time mode
•Alarm memory function can store up to 100 alarm events
(camera number, date and time)
•Video loss detection function
•Remote control capability via a D-sub 25-pin
•Compact 1U height unit and rack mount capability
YS-DX316P YS-DX216CE
General
Video signal system: PAL standard CCIR standard
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 22 W 16 W
Operating temperature: 0 to 45˚C (32 to 113˚F)
Storage temperature: -20 to 60˚C (-4 to 140˚F)
Dimensions: 420 (W) x 54 (H) x 320 (D) mm
(16
5
/8 x 2
1
/4 x 12
5
/8 inches)
Mass: Approx. 4.2 kg (9 lb 4 oz)
Video inputs
Camera input 1 to 16: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
VCR input: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
S-VHS Y/C inputs: Din Connector -
Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Video outputs
Monitor 1 output: BNC type x 1, VS or VBS BNC type x 1, VS
Monitor 2 output: BNC type x 1, VS or VBS BNC type x 1, VS
VCR output: BNC type, VS or VBS, BNC type, VS,
1.0 Vp-p, 75 Ω 1.0 Vp-p, 75 Ω
S-VHS Y/C output: Din Connector -
Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Alarm output: DC 5 V 5.7 kΩ
Alarm duration: 10, 20, 30, 40, 50, 60, CC* sec.
Switch input from VCR: Low active (100 kΩ pull-up)
Control terminal: D-sub: 25-pin
Alarm input: contact close (x 16)
Remote control input
Sequence time: 0.5 to 30 sec. (0.5 sec. increments)
On-screen display: 8 character title, date/time
Buzzer: ON/OFF
Dimensions:
Unit: mm (inches)
Specifications
Supplied Accessories
Rack mount kit (for EIA standard rack) (1 set)
D-sub 25-pin plug components (1 set)
Operation manual (1)
* Stays in alarm mode for as long as alarm input remains active
320 (12
5
/
8
)
54
(2
1
/
4
)
420 (16
5
/
8
)
Multiplexer
YS-DX316P/YS-DX216CE