Filter
Top Products
42
MULTIPLEXERS
Multiplexer
YS-SX310P/YS-SX210CE
•Simplex video multiplexer with up to 10 camera inputs
•Either asynchronous or synchronous cameras can be
connected
•Multiplex recording to one VCR while switching
between each camera by a field (1/50 sec.) for precise
surveillance of multiple points
•Long time recording with Time Lapse VCR
•Video loop through for up to 10 cameras
•Live pictures can be displayed in full screen or
sequence while simultaneously recording
•Quad or multi-screen (7/10) can be displayed*
•Playback can be reviewed in full screen, sequence,
quad, and multi-screen (7/10)
•Freeze picture function in play back mode
•Electronic zoom (x2) function in play back mode
•Built in time/date and camera title generator
•Easy on screen setup
•10 alarm inputs, each corresponding to a camera input
•Alarm monitor function automatically provides
independent monitoring of channels on which alarms
occur
•Programmable alarm recording time mode
•Alarm memory function can store up to 100 alarm
events (camera number, date and time)
•Video loss detection function
•Remote control capability via a D-sub 25-pin
•Compact 1U height unit and rack mount capability
* This feature is not applicable when unit recording with a VTR
YS-SX310P YS-SX210CE
General
Video signal system: PAL standard CCIR standard
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 14 W 12 W
Operating temperature: 0 to 45˚C (32 to 113˚F)
Storage temperature: -20 to 60˚C (-4 to 140˚F)
Dimensions: 420 (W) x 54 (H) x 320 (D) mm
(16
5
/8 x 2
1
/4 x 12
5
/8 inches)
Mass: Approx. 4.2 kg (9 lb 4 oz)
Video inputs
Camera input 1 to 10: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
VCR input: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
Video outputs
Monitor output: BNC type x 1, VS or VBS BNC type x 1, VS
VCR output: BNC type, VS or VBS, BNC type,
1.0 Vp-p, 75 Ω VS, 1.0 Vp-p, 75 Ω
Alarm output: DC 5 V 5.7 kΩ
Alarm duration: 10, 20, 30, 40, 50, 60, CC* sec.
Switch input from VCR: Low active (100 kΩ pull-up)
Control terminal: D-sub: 25-pin
Alarm input: contact close (x 10)
Remote control input
Sequence time: 0.5 to 30 sec. (0.5 sec. increments)
On-screen display: 8 character title, date/time
Buzzer: ON/OFF
Dimensions:
Unit: mm (inches)
Specifications
Supplied Accessories
Rack mount kit (for EIA standard rack) (1 set)
D-sub 25-pin plug components (1 set)
Operation manual (1)
* Stays in alarm mode for as long as alarm input remains active
320 (12
5
/
8
)
54
(2
1
/
4
)
420 (16
5
/
8
)