Filter
Top Products
51
TIME LAPSE VIDEO RECORDERS
•Adaptive Picture Control (APC) delivers optimum
picture quality to the recording image
•A tape recorded in the 3-hour mode can be played
back by any S-VHS or VHS VCR
•Audio recording and playback are possible in 3, 12 and
24-hour modes
•Built-in time and date generator allows time and date
information to be displayed along with the Alarm count
and Recording/Playback speed
•Various recording modes such as Auto Repeat
Recording, Timer Recording and Alarm Recording for
versatile situations
•Holiday setting function
•Daylight Saving Time setting function
•Quick recording check function
•
By using alarm recall and scan functions, pictures
recorded during alarm mode can be easily checked
•Field-by-field picture playback capability
•External timer input capability
•Automatic clock adjusting is possible when several
VCRs are connected
•On-screen display permits easy-to-follow operation
•Auto head cleaning function
•Tape before-end signal output capability
•Warning signal output capability
•Buzzer setting function
•Power-failure protection for up to 30 days
•
Security lock function for avoiding accidental operation errors
•
External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5mm mini jack
SVT-S3050P
General
Tape format: S-VHS or VHS
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) x 100 (H) x 349 (D) mm
(16
5
/8 x 4 x 13
1
/2 inches)
Mass: Approx. 5.8 kg (12 lb 9 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time:
3, 12, 24, 48, 72, 96, 120 and 168 hours
(with an SE/E-180 tape)
Alarm recording speed: 3, 12-hour mode, NC*
1
Alarm recording duration: 20 s, 1 m, CC*
2
Fast forward/rewind time: Approx. 4 minutes (with an SE/E-180 tape)
Video
Recording Playback system:
Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
Input: BNC: 1.0Vp-p, 75 Ω, unbalanced
S -VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Output: BNC: 1.0 Vp-p, 75 Ω, unbalanced
S -VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Horizontal resolution:
Colour mode: More than 400 TV lines (S-VHS)
Black & White mode: More than 400 TV lines (S-VHS)
Signal-to-noise ratio: 45 dB (S-VHS)
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: -7.8 dBu, 47 kΩ (phono jack)
Output: -7.8 dBu, 600 Ω (phono jack)
Microphone input: -60 dBu, 600 Ω (ø3.5 mm minijack)
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 kΩ (Low active)
Switch output: +5 V, 5.7 kΩ (Low active)
Tape end output: +5 V, 5.7 kΩ (Low active)
Warning output: +5 V, 5.7 kΩ (Low active)
Timer output: +12 V, 5.7 kΩ (high active)
External timer input: Low level
Clock set output: +5 V, 5.7 kΩ (Low active)
Clock set input: Low level
Series output: +5 V, 5.7 kΩ (Low active)
Series input: Low level
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
Notes:
*1
No change of recording speed
*2
Stays an alarm for as long as the alarm input remains active.
0 dBu = 0.775 Vrms
S-VHS Time Lapse Videocassette Recorder
SVT-S3050P
Specifications
•
High horizontal resolution of 400TV lines using S-VHS format
•Excellent signal-to-noise ratio of 45 dB
•7 different time lapse recording/playback modes are
available in addition to the standard mode (3 hours
time mode) with a normal 180-minute tape
Note: In time lapse modes, it is possible to additionally record three hours longer than the original modes.
TIME MODE (h) 3 12 24 48 72 96 120 168
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14
Supplied accessories
AC power cord (1)
Operation manual (1)
Optional accessory
SVT-RM10 Remote Control Unit
RS-232C interface board SVT-RS1A
TLV parts kit TPK-885P
Rear Panel