Sony CH280 Security Camera User Manual


 
Administrating the Camera
Saving the Camera Position and Action — Preset position Menu
70
Saving the Camera
Position and Action
Preset position Menu
When you click in the Administrator
menu, the Preset position menu appears. This allows you
to save the camera’s pan, tilt and zoom positions and set
position (programmed action of the camera).
The Preset position menu consists of 2 tabs: Position
and Preset tour.
The Preview screen is displayed.
Note
Preset position menu is not available when Solid PTZ is
set to On in the Camera menu-Video codec tab.
Position Tab — Saving pan/tilt/
zoom position
You can save up to camera positions (pan, tilt and zoom
positions).
Preview screen
This screen is for monitoring images and setting preset
positions.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 23).
Home position setting
Set the current camera position as the home position.
Set
Click to save the current pan, tilt and zoom positions as
the home position. To move the camera to the home
position, click in the control panel (page 21).
Reset
Click to reset the home position to the factory-set
position.
Position at alarm
The camera can synchronize a preset position with
Sensor input or with the detection functions.
If an alarm is detected by the sensor input or the motion
detection function, the camera automatically moves to
the corresponding preset position.
If you do not want to synchronize with any preset
number, select none.
Sensor input 1 (S1)
Select a preset position to synchronize with the alarm
from Sensor input 1.
Camera tampering detection (TP)
Select the preset position to synchronize with the camera
tampering detect alarm.
VMF (VM)
Select the preset position to synchronize with the VMF
detection alarm.
Motion Detection (MD)
Select a preset position to synchronize with the alarm
from the motion detection.
Click Detection, and the motion detection menu is
displayed to allow you to set the motion detection
function (page 91).
Audio detection (AD)
The alarm detected by the audio detection function.
Click Detection, and the audio detection menu is
displayed to allow you to set the audio detection
function (page 91).
Note
In the case where the synchronized preset position is
specified, an alarm event that happens when the camera
moves to the preset position will be invalid.
Preset position