Filter
Top Products
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Troubleshooting > Troubleshooting > Recording
Recording
Refer also to “Memory card”.
Pressing START/STOP or PHOTO does not record images.
The playback screen is displayed. Stop playback, and select [Shooting Mode] [
Movie] or [ Photo].
Your camcorder is recording the image you have just shot on the recording media. You cannot make
new recording during this period.
The recording media is full. Delete unnecessary images. [Details]
Total number of movie scenes or photos exceeds the recordable capacity of your camcorder
[Details][Details]. Delete unnecessary images [Details].
Photos cannot be recorded.
You cannot record photos together with:
[
Fader]
The camcorder cannot shoot photos while it is in the movie recording mode, depending on the [
REC Mode] or [ Frame Rate] selected.
The access lamp remains lit or flashing even if recording has stopped.
Your camcorder is recording the scene you have just shot on the memory card.
The imaging field looks different.
The imaging field may look different depending on the condition of your camcorder. This is not a
malfunction.
The actual recording time for movies is less than the expected recording time
of the recording media.
Depending on the recording conditions, the time available for recording may be shorter, for example
when recording a fast moving object, etc.
The camcorder stops operating.
If you keep applying vibration on the camcorder, recording may stop.
There is a slight time lag between the moment when START/STOP is pressed
and the actual movie recording starts or stops.
On your camcorder, there may be a slight time difference between the moment when you press
START/STOP and when the actual movie recording starts/stops. This is not a malfunction.
167