Filter
Top Products
132
When operating using the “Memory Stick”
– DCR-TRV320E only
Symptom Cause and/or Corrective Actions
• The POWER switch is set to CAMERA or OFF (CHARGE).
c Set it to MEMORY. (p. 94)
• “Memory Stick” is not inserted.
c Insert a “Memory Stick”. (p. 93)
• The “Memory Stick” has already been recorded to its full
capacity.
c Erase unnecessary images and record again. (p. 118, 96)
• The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” on your camcorder or use
another “Memory Stick”. (p. 79)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The image is protected.
c Cancel image protection. (p. 116)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The image to protect is not played back.
c Press MEMORY PLAY to play back the image. (p. 109)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
• The image to write a print mark is not played back.
c Press MEMORY PLAY to play back the image. (p. 109)
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock. (p. 91)
The “Memory Stick” does not
function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick”.
Deleting all the images cannot be
carried out.
You cannot write a print mark on the
still image.
The photo save function does not
work.
You cannot protect the image.
Troubleshooting