Filter
Top Products
118
Changing the menu settings
Note on the playback of the NTSC tapes
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Notes on LCD B.L.
•When you select “BRIGHT”, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, “BRIGHT” is automatically selected.
Note on VF B.L.
When you select “BRIGHT”, battery life is reduced by about 10 percent during recording.
To get low-
intensity
Icon/item
HiFi SOUND
AUDIO MIX
A/VtDV OUT
NTSC PB
LCD B. L.
LCD COLOUR
VF B.L.
POWER
switch
ST1 ST2
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 172).
To play back a stereo tape with the left sound or a
dual sound tape with main sound.
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound.
To adjust the balance between the stereo 1 and
stereo 2 (p. 106).
To output digital images and sound in analog
format using your camcorder.
To output analog images and sound in digital
format using your camcorder.
To play back a tape recorded in the NTSC colour
system on a PAL system TV.
To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode.
To set the brightness on the LCD screen normal.
To brighten the LCD screen.
To adjust the colour on the LCD screen, turn and
press the SEL/PUSH EXEC dial.
To set the brightness on the viewfinder screen to
normal.
To brighten the viewfinder screen.
To get high-
intensity
Mode
z STEREO
1
2
z OFF
ON
z ON PAL TV
NTSC 4.43
z BRT NORMAL
BRIGHT
z BRT NORMAL
BRIGHT
VCR
VCR
VCR