Filter
Top Products
Additional Information
Additional Information
117
• This unit does not support high speed data
transfer.
Notes on image data compatibility
• Image data files recorded on a “Memory
Stick” by your camcorder conform to the
Design Rule for Camera File Systems
universal standard established by the JEITA
(Japan Electronics and Information
Technology Industries Association).
• On your camcorder, you cannot play back still
images recorded on other device (DCR-
TRV890E/TRV900/TRV900E or DSC-D700/
D770) that does not conform to the universal
standard. (These models are not sold in some
regions.)
• If you cannot use a “Memory Stick” that has
been used with other device, format it with
your camcorder (p. 66). Note that formatting
erases all information on the “Memory Stick.”
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded
with other device.
• “Memory Stick,” and “MagicGate
Memory Stick” are trademarks of Sony
Corporation.
• “Memory Stick Duo” and “ ”
are trademarks of Sony Corporation.
• “Memory Stick PRO” and “ ”
are trademarks of Sony Corporation.
• “MagicGate” and “ ” are
trademarks of Sony Corporation.
• All other product names mentioned herein
may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned
in each case in this manual.
About the
“InfoLITHIUM”
battery pack
This unit is compatible with the
“InfoLITHIUM” battery pack (M series). Your
camcorder operates only with the
“InfoLITHIUM” battery pack.
“InfoLITHIUM” M series battery packs have
the mark.
What is the “InfoLITHIUM” battery
pack?
The “InfoLITHIUM” battery pack is a lithium-
ion battery pack that has functions for
communicating information related to operating
conditions between your camcorder and an
optional AC Adaptor/charger.
The “InfoLITHIUM” battery pack calculates
the power consumption according to the
operating conditions of your camcorder, and
displays the remaining battery time in minutes.
With an AC Adaptor/charger (optional), the
remaining battery time and charging time
appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in
an ambient temperature of between 10°C to
30°C (50°F to 86°F) until the CHG (charge)
lamp turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
• After charging is complete, either disconnect
the cable from the DC IN jack on your
camcorder or remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10°C (50°F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for
a longer time.
SERIES
TM
,continued