Filter
Top Products
16
You can charge the battery after attaching the
“InfoLITHIUM” battery pack (P series)
(p.95) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.) Installing the
battery pack with excess force may lead to
camcorder malfunction such as deterioration in
battery pack performance or difficulty in
removing the battery pack.
1 Slide the battery pack in the
direction of the arrow until it clicks.
2 Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3 Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover to connect the AC
Adaptor.
4 Connect the power cord to the AC
Adaptor and the wall outlet.
The CHG (charge) lamp lights up and
charging starts.
Step 2: Charging the battery pack
DC IN jack
CHG lamp
Jack cover
POWER switch
Battery
pack
DC plug
Power cord
To the wall outlet
AC Adaptor
ON
OFF
(CHG)
POWER
MODE
Jack cover
Face down the
v mark to match
the v mark of
the camcorder.
CHG