Sony DCR-SR100 Camcorder User Manual


 
74
1 Connect your camcorder to the TV
or VCR/DVD device with the A/V
connecting cable (supplied) 1 or
the A/V connecting cable with S
VIDEO (optional) 2.
Connect your camcorder to the output jacks
of a TV or VCR/DVD device.
2 If you are recording from a VCR/
DVD device, insert the video tape
or the DVD into the playback
device.
3 Slide the POWER switch to light up
the (PLAY/EDIT) lamp.
4 Touch t [REC CTRL].
If you connected your camcorder to the
device which has the S VIDEO jack,
touch [SET] t [VIDEO INPUT] t
[S VIDEO] t .
Touch [SET] to change the recording mode
or adjust the volume.
Touch [SET] t [ REMAIN] t [ON]
to display the remaining hard disk free space
indicator all the time.
5 Start playing the cassette or the
DVD on the play back device, or
select a TV program.
The image played on the connected
device appears on the LCD screen of your
camcorder.
6 Touch [REC] at the point you want
to start recording.
7 Touch at the point you want
to stop recording.
8 Touch [END].
There may be a time difference between the point
where you press [REC] and the actual point that
the recording starts/stops.
You cannot record an image as a still image even
if you press PHOTO during recording.
Recording images from a TV or VCR/DVD device (continued)