Sony DCR-SR100 Camcorder User Manual


 
83
Troubleshooting
Tiny spots in white, red, blue, or green appear on the screen.
The spots appear when you are recording in [SUPER NS] or [COLOR SLOW S]. This is not
a malfunction.
The color of the image is not correctly displayed.
Set the NIGHTSHOT switch to OFF (p.34).
The image appears too bright on the screen, and the subject does not appear on
the screen.
Set the NIGHTSHOT switch to OFF (p.34).
The image appears too dark on the screen, and the subject does not appear on
the screen.
The LCD screen backlight is switched off. Turn on the LCD backlight by pressing and holding
DISP/BATT INFO (p.20).
Flickering or changes in color occurs.
This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp
with [PORTRAIT] or [SPORTS]. Cancel [PROGRAM AE] in this case (p.52).
Black bands appear when you record a TV screen or computer screen.
Set [STEADYSHOT] to [OFF] (p.56).
The supplied Remote Commander does not function.
Set [REMOTE CTRL] to [ON] (p.63).
Insert a battery into the battery holder with the +/– polarities correctly matching the +/– marks
(p.98).
Remove any obstructions between the Remote Commander and the remote sensor.
Point the remote sensor away from strong light sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander may not function properly.
Remove the conversion lens (optional) as the remote sensor may be obstructed by it.
Another DVD device malfunctions when you use the supplied Remote
Commander.
Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your
DVD device with black paper.
Remote Commander
Continued
,