Filter
Top Products
150
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 88)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 177)
• The batteries are dead.
c Insert new ones. (p. 177)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 88)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 163)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate your
camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 18)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony service
facility.
The Remote Commander supplied
with your camcorder does not work.
The melody or beep sounds for 5
seconds.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
Troubleshooting
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR.