Filter
Top Products
27-GB
Preparation for Network Operation
(7) Tap [Passkey].
The character input screen appears.
,
(8) Enter the passkey.
For details of how to input characters, see “How to input characters” (p. 8).
For example, when using the BTA-NW1/BTA-NW1A Modem Adaptor, the
passkey is the same as its serial number indicated on the label on the rear
panel.
Tip on “Passkey”
The passkey is an identification number needed to allow two Bluetooth devices
to communicate with each other. The connection is permitted after you enter
the passkey. This “Passkey” is sometimes referred to as the “Bluetooth
passkey”, “PIN”, “Bluetooth PIN”, etc. For details, refer also to the operating
instructions supplied with the modem adaptor.
(9) Tap [Enter].
The passkey input screen appears again.
(10)Tap [OK].
When registration is complete, the Bluetooth Setup screen appears again and
the message “Bluetooth Registration Complete” appears.
Registering Bluetooth devices
MODEM ADAPTOR WITH BLUETOOTH
TM
FUNCTION
MODEL NO.
BTA-NW1
®
Passkey
The number used when registering a
Bluetooth device