Sony DNW-7/7P Camcorder User Manual


 
Chapter 4 Adjustments and Settings for Recording 4-75
4
MASTER GAIN page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired position (LOW, MID, HIGH or
TURBO) (or use the rotary encoder).
4 Press the rotary encoder, to display a question mark to the left of the
display.
5 Turn the rotary encoder to display the gain value you wish to select.
Any of 3, 0, 3, 6, 9, 12, 18, 24, 30, 36,or 42 dB can be set for each
of the L, M, and H positions, in any sequence.
For TURBO, any of –3, 0, 3, 6, ..., 30, 36 , 42 dB
1)
can be selected.
Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST
to reset the gains to the factory set values (L = 0 dB, M = 9 dB, H =
18 dB, and TURBO = 36 dB).
To change the gain corresponding to another switch position, return
to step 3.
....................................................................................................................................
1) Video gain boosted from 30 dB to 36 or 42 dB by combining blocks of 2 or 4
adjacent pixels of the CCD.
(Continued)
Gain corresponding to
L position of GAIN selector
Gain corresponding to
M position of GAIN selector
Gain corresponding to TURBO
GAIN button selection
Gain corresponding to
H position of GAIN selector
m
∗∗∗
MASTER GAIN
∗∗∗
HIGH
LOW
MID
TURBO
:
:
0dB
: 18dB
9dB
: 36dB