![](http://pdfasset.owneriq.net/d/5b/d5b90998-5471-40cf-867d-9a94bfbb7fc4/d5b90998-5471-40cf-867d-9a94bfbb7fc4-bgd0.png)
5-16 Chapter 5 Setting Up the Camcorder
5
Reattaching the eyepiece
1 Align the mark on the eyepiece locking ring with the one on the
viewfinder barrel.
2 Align the mark on the eyepiece end (see step 2 in the illustration for
eyepiece detachment) with those on the eyepiece locking ring and
viewfinder barrel. Then insert the eyepiece into the viewfinder
barrel.
3 Turn the eyepiece locking ring clockwise until its “LOCK” arrow
points at the mark on the viewfinder barrel.
Note
When the eyecup is worn out, replace it with a new one (service part
number 3-723-079-02).