Sony DPF-D820/D810 Digital Photo Frame User Manual


 
43
GB
Using with a computer
Using with a computer
Connecting to a
computer
Connecting to a computer allows you to view
images in the internal memory of the photo
frame with a computer and copy them to a
computer and to copy images from a computer
to the photo frame.
To connect a computer to the photo frame, your
computer must satisfy the following
recommended system requirements.
x Windows
Recommended OS: Microsoft Windows 7/
Windows Vista SP2 /Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
Notes
If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
You cannot operate the photo frame from another
USB device being used simultaneously.
Do not disconnect the USB cable during data
communication.
Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
The photo frame has been demonstrated as operable
when connected to a computer or Sony digital photo
printer. When other devices are connected to the
photo frame, these devices may not recognize the
internal memory of the photo frame.
Do not connect a computer to the USB mini B
connector on the photo frame simultaneously when
a USB memory or external device is connected to
the EXT INTERFACE (USB A) connector.
Note
This section shows an example for a connection for
Windows Vista. Depending on the OS you use, the
screen display and procedures may vary.
1 Connect the AC power adaptor to
the photo frame and connect the AC
power adaptor to an AC outlet.
(supplied Operating Instructions –
“Turning the photo frame on”)
2 Connect the computer and photo
frame with a commercially available
USB cable.
Note
Use a B-Type USB cable that is less than 3
meters long.
3 Turn the photo frame on. (page 11)
System requirements
Connecting to a computer to
exchange images
To USB mini B
connector
To USB connector
Computer
Continued