Sony DPF-XR100 Digital Photo Frame User Manual


 
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm
Master: Left
DPF-XR100/VR100 4-259-440-11 (1)
30
GB
Connecting to a computer
1 Connect the AC adaptor to the photo frame, and to an
AC outlet.
2 Connect the computer and photo frame with a
commercially available USB cable.
3 Turn the photo frame on.
4 Operate the computer to exchange images with the
internal memory of the photo frame.
System Requirements
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
To USB mini B connector
To USB connector
Computer
P Notes
Use a Mini B-Type USB cable.*
* When you use a commercially
available USB cable, use a
USB cable with a mini B-type
plug (for the USB Mini B
connector of this unit, frame-
side connector type) shorter
than 3 meters.
If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
You cannot operate the photo
frame from another USB device
being used simultaneously.
Do not disconnect the USB cable
during data communication.
Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
The photo frame has been
demonstrated as operable when
connected to a computer or Sony
digital photo printer. When other
devices are connected to the photo
frame, these devices may not
recognize the internal memory of
photo frame.
Use a USB cable with the USB
logo.
010COV.book Page 30 Wednesday, August 25, 2010 12:06 PM