87
GB
Additional information
LOCK LOCK
About the “Memory Stick” and PC card media
The printer can read and write “Memory
Stick” and PC card (PCMCIA ATA
compatible type II flash memory cards
with a power specification of 5V or 3.3/
5V). By using a commercially available
PC card adaptor, you can also use Smart
Media and other types of compact flash
memory cards.
On “Memory Stick”
“Memory Stick” is a removable storage
media used with a digital still camera,
video camera, or PC. You can easily
display, save or delete images using this
medium.
There are two types of “Memory Stick”:
an ordinary “Memory Stick” and
“MagicGate Memory Stick.” The
“MagicGate Memory Stick” is equipped
with the MagicGate copyright protection
technology that uses encryption
technology. You can use both types of
“Memory Stick” with your printer.
However, because the printer does not
support the MagicGate standards, data
recorded with the printer is not subject
to MagicGate copyright protection.
To protect “Memory Stick”
images
To prevent accidental erasure of
important image data, use the write
protect switch on the “Memory Stick.”
Slide the switch to the write protect or
write enable position:
xWrite enable position
Slide the switch left to the write
enable position. You can read, write
and delete data on the “Memory
Stick.” Formatting the “Memory
Stick” is also enabled. When storing
images on the “Memory Stick,” set
the switch to the write enable
position.
xWrite protect position
Slide the switch right to the write
protect position. It is now
impossible to write or delete the data
on the “Memory Stick.” We suggest
you set the switch to the write
protect position while just viewing
“Memory Stick” images.
Write
protect
position
Write
enable
position
Connector
Place the label here