Filter
Top Products
91
Using a network
Collaboration Shot
An image captured with this camera can
automatically be sent to other cameras
connected via a wireless connection. Up to
four cameras can share the image.
1 In still image shooting mode,
press WLAN.
When a nickname has not been entered, the
nickname setting display appears (page 90).
• This step can be done by going to [ ]
(Communication) t [ Collaboration
Shot] from the home display.
2 After message “Press WLAN
button on other device at same
time” appears, press WLAN
simultaneously.
“Connecting...” appears. Once the connection
is established, the image sharing area is
displayed along with the shooting area.
3 To connect the third device,
simultaneously press WLAN of
either the first or the second
device along with that of the third
device.
4 To connect the fourth device,
simultaneously press WLAN of
one of the first three devices
along with that of the fourth
device.
5 Shoot your image.
The image is uploaded to all other connected
cameras.
WLAN
(Wireless
network)
button