Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
58
GB
White Balance
Adjusts color tones according to the surrounding light conditions. Use this function if image
color appears unnatural.
1 MENU t (White Balance) t desired mode
• [White Balance] cannot be adjusted in Intelligent Auto Adjustment, or Easy Shooting mode.
• You cannot select [White Balance] in Backlight Correction HDR mode, if flash is set to [On].
• [Flash] in [White Balance] cannot be adjusted in the following situations:
– In Anti Motion Blur mode
– In Hand-held Twilight mode
– When Scene Selection is set to (High Sensitivity) mode.
– In Movie Mode
– In iSweep Panorama mode
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent White Balance 1], [Fluorescent White Balance 2], or [Fluorescent White Balance 3].
• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
• When flash is [On] or [Slow Synchro], the white balance can only be adjusted to [Auto], [Flash], [One
Push], or [One Push Set].
• [One Push Set] is unable to be selected while charging the flash.
(Auto) Adjusts the white balance automatically so that the colors appear
natural.
(Daylight) Adjusts for outdoors conditions on a fine day, evening views, night
scenes, neon signs, fireworks, etc.
(Cloudy) Adjusts for a cloudy sky or a shady location.
(Fluorescent
White Balance 1)
(Fluorescent
White Balance 2)
(Fluorescent
White Balance 3)
[Fluorescent White Balance 1]: Adjusts for white fluorescent
lighting.
[Fluorescent White Balance 2]: Adjusts for natural white
fluorescent lighting.
[Fluorescent White Balance 3]: Adjusts for day white fluorescent
lighting.
n
(Incandescent)
Adjusts for places under incandescent lamp, or under bright
lighting, such as in a photo studio.
(Flash) Adjusts for the flash conditions.
(One Push) Adjusts the white balance depending on the light source. The white
color memorized in [One Push Set] mode becomes the basic white
color. Use this mode when [Auto] or other modes cannot be set the
color properly.
(One Push
Set)
Memorizes the basic white color which will be used in [One Push]
mode.
Notes