Filter
Top Products
Digital Still Camera
DSC-RX10
Capturing a basic white color in [Custom Setup] mode
In a scene where the ambient light consists of multiple types of light sources, it is recommended to
use the custom white balance in order to accurately reproduce the whiteness.
1. MENU → (Camera Settings) → [White Balance] → [Custom Setup].
2. Hold the camera/camcorder so that the white area fully covers the AF area located in the center,
and then press on the center of the control wheel.
The calibrated values (Color Temperature and Color Filter) are displayed.
3. Select a registration number using the right/left side of the control wheel.
The monitor returns to the recording information display while retaining the memorized custom
white balance setting.
Note
The message [Custom WB Error] indicates that the value is higher than the expected range, when
the flash is used on a subject with too bright colors in the frame. If you register this value, the
indicator turns yellow on the recording information display. You can shoot at this point, but it
is recommended that you set the white balance again to get a more accurate white balance value.
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use