Filter
Top Products
Digital Still Camera
DSC-RX10
Access Point Set.
You can register your access point manually. Before starting the procedure, check the SSID name of
the access point, security system, and password. The password may be preset in some devices. For
details, see the access point operating instructions, or consult the access point administrator.
1. MENU → (Wireless) → [Access Point Set.].
2. Select the access point you want to register.
When the desired access point is displayed on the screen: Select the desired access point.
When the desired access point is not displayed on the screen: Select [Manual Setting] and
set the access point.
*
For the input method, refer to “How to use the keyboard.”
If you select [Manual Setting], input the SSID name of the access point, then select the
security system.
3. Input the password, and select [OK].
Access points without the mark do not require a password.
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
Help Guide
How to Use