Filter
Top Products
39
Using the Setup screen
For details on the operation
t
page 37
Selects how to superimpose the date or time onto the image. Select this before shooting.
• The date and time do not appear during shooting, instead, the indicator appears. The date and time
appear in red on the lower-right corner of the screen during playback only.
• You cannot insert the data and time into movies.
• The date and time superimposed cannot be removed later.
Reduces the red-eye phenomenon when using the
flash. Select this before shooting.
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• You cannot shoot the next image during the Auto Review display. If you press the shutter button halfway
down during this period, the recorded image display disappears and you can immediately shoot the next
image.
Date/Time
Day&Time
Superimposes the date, hour, and minute.
Date
Superimposes the year, month and day.
• The date is inserted in the order you select.
Off
Does not superimpose the date and time.
Red Eye Reduction
On ( )
Reduces the red-eye phenomenon.
• The flash pre-strobes twice or more before shooting.
Off
Does not use Red Eye Reduction.
Auto Review
On
Use the Auto Review.
Off
Does not use Auto Review.