74
Cannot shoot images in succession.
• The internal memory or the “Memory Stick Duo” is full. Delete unnecessary images.
• The battery level is low. Install charged batteries or replace with new ones.
Refer to “Computers” (page 75) in conjunction with the following items.
Your camera cannot play back images.
• Set the mode dial to (page 24).
• The folder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB communication (page 53).
The date and time are not displayed.
• !(Screen status) button is turned off (page 20).
The image appears rough right after playback starts.
• The image may appear rough right after playback starts due to image processing. This is not a
malfunction.
The image does not appear on the TV screen.
• Check [Video Out] to see if the video output signal of your camera is set to the color system
of your TV (page 44).
• Check whether the connection is correct (page 68).
• The USB cable is connected to the USB jack. Disconnect it according to the correct procedure
(page 53).
The image does not appear on the screen.
• If the A/V cable is connected, disconnect it (page 68).
No recorded sound is played back with movies on the camera.
• The sound recorded with moives can only be played back on TV, PC.
Viewing images