Filter
Top Products
66
Copying images to your computer using the
“PMB”
1 Insert “Memory Stick Duo” media
with recorded images into the
camera.
• When copying images in the internal
memory, this step is unnecessary.
2 Insert the batteries with enough
power remaining in the camera.
• When you copy images to your computer
using the batteries with little remaining
charge, copying may fail or image data may
become corrupted if the batteries shuts
down too soon.
3 Set the mode switch to
(Playback), then turn on the
camera and the computer.
“Connecting...” appears on the screen of the
camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* is displayed on the screen during the
communication session.
Do not operate the computer while the indicator
is displayed. When the indicator changes to
, you can start using the computer
again.
• If “Connecting...” does not appear, set [USB
Connect] to [Mass Storage] (page 54).
Preparing the camera and the
computer
Mode switch
Connecting the camera to your
computer
USB cable
2 To a USB jack
1 To the (USB)
jack
Access
indicators*