Filter
Top Products
16
Getting started
x
“Memory Stick” that you
can use
“Memory Stick Duo”
You can also use a “Memory Stick PRO Duo”
or “Memory Stick PRO-HG Duo” with the
camera.
For details on the number of images/time that
can be recorded, see pages 26, 29. Other types
of “Memory Stick” or memory card are not
compatible with the camera.
“Memory Stick”
You cannot use a “Memory Stick” with the
camera.
x
To remove the
“Memory
Stick Duo”
• Never remove the “Memory Stick Duo”/
battery pack when the access lamp is lit. This
may cause damage to data in the “Memory
Stick Duo”/internal memory.
x
When there is no “Memory
Stick Duo” inserted
Images are stored in the camera’s internal
memory (approximately 15 MB).
To copy images from the internal
memory to a “Memory Stick Duo,” insert
the “Memory Stick Duo” in the camera,
touch and select [Copy] in
[Memory Tool] of (Manage
Memory) (page 44).
x
To remove the battery pack
x
Checking the remaining
battery charge
A remaining charge indicator appears on
the upper left of the LCD screen.
• It takes about one minute until the correct
remaining charge indicator appears.
• The remaining charge indicator may not be
correct under certain circumstances.
• If the NP-FD1 battery pack (not supplied) is
used, the minute display is also shown after
the remaining charge indicator.
• Battery capacity decreases over time and
through repeated use. When the operating
time per charge decreases markedly, the
battery pack needs to be replaced. Purchase a
new battery pack.
Note
Make sure that the access
lamp is not lit, then push the
“Memory Stick Duo” in once.
Access lamp
Notes
Slide the battery eject lever.
Be sure not to drop the
battery pack.
Battery eject
lever
High
Low