Filter
Top Products
42
Ch
an
gi
n
g
camera se
tti
n
g
s
Changing the screen display
• disappears from the screen if [Image Only] playback is selected. To display the buttons,
touch the center of the screen. The [Normal] display returns temporarily.
Changing the operation sounds
You can set the sound produced when you operate the camera.
1
Touch t desired
mode t .
(Normal): Displays buttons and
icons
(Simple): Displays only buttons
(Image Only): Hides buttons
and icons
Note
1
Touch t (Settings)
t [Main Settings] t
t [Beep] t t desired
mode t .
Shutter: Turns on the shutter sound
when you press the shutter button.
On: Turns on the beep/shutter sound
when you operate the touch panel/
press the shutter button.
Off: Turns off the beep/shutter sound.
zHistogram and brightness settings
The following setting can be accessed by touching .
Histogram: A histogram is a graph showing the brightness of an image. The graph display
indicates a bright image when skewed to the right side, and a dark image when skewed to the left
side.
Brightness: This sets the backlight brightness ([Normal]/[Bright]). When viewing images in
bright outside light, reset to [Bright]. However, the battery power may decrease faster under such
condition.