Filter
Top Products
51
GB
Others
The remaining charge indicator is incorrect.
• The battery charge will quickly get used up and the actual remaining battery charge will be
lower than the indicator in the following cases:
– When you use the camera in an extremely hot or cold location.
– When you use the flash and zoom frequently.
– When you repeatedly turn the power on and off.
– When you set the screen brightness higher using DISP (screen display) settings.
• The battery pack is discharged. Insert the charged battery pack (page 12).
• The battery pack is dead. Replace it with a new one.
Cannot charge the battery pack while it is inside the camera.
• You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery
charger (supplied) to charge the battery.
The CHARGE lamp flashes while charging the battery.
• Remove and reinsert the battery pack, making sure it is installed correctly.
• The temperature may be inappropriate for charging. Try charging the battery pack again
within the proper charging temperature range (10°C to 30°C (50°F to 86°F)).
Cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo” media (pages 26, 29).
If it is full, do one of the following:
– Delete unnecessary images (page 32).
– Change the “Memory Stick Duo” media.
• You cannot record images while charging the flash.
• When shooting a still image, set the mode switch to (Still Image).
• Set the mode switch to (Movie) when shooting movies.
White, black, red, purple or other streaks appear on the image, or the image
seems reddish.
• This phenomenon is called smearing. This is not a malfunction.
Cannot play back images.
• Set the mode switch to (Playback) (page 19).
• The folder/file name has been changed on your computer.
• No guarantees are made for playing back, on this camera, files containing images which were
processed on a computer or images which were shot using other cameras.
• The camera is in USB mode. Delete the USB connection.
Shooting still images/movies
Viewing images