Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
55
GB
Anti Blink
When Scene Selection is set to (Soft Snap) mode and the subject blinks while shooting an
image, the camera automatically takes one more shot. If eyes are open in the second image, only
the second image is recorded.
1 Set the mode dial to (Scene Selection).
2 Select (Soft Snap).
3 MENU t (Anti Blink) t desired mode
• Anti Blink does not function in the following situations.
– When using the flash
– During burst or bracket shooting
– When the Face Detection function does not work
– When the Smile Shutter function is activated
• Sometimes Anti Blink function does not work depending on the situation.
• When the Anti Blink function is set to [Auto] but only images with the subject’s eyes closed are
recorded, the message “Blinked eye detected” is displayed on the LCD screen. Shoot again as necessary.
(Auto)
When Face Detection is active, the Anti Blink function operates so
that images with the subject’s eyes open are recorded.
(Off)
Does not use the Anti Blink function.
Notes