Sony DSR-PD100AP Camcorder User Manual


 
133
Additional information
Trouble check
Cause and/or corrective actions
Disconnect the power cord (mains lead) of the AC power
adaptor or remove the battery pack, then reconnect it in
about 1 minute. Turn the power on. If the functions still
do not work, open the LCD panel and press the RESET
button beside the speaker using a sharp-pointed object. (If
you press the RESET button, all the settings including the
date and time return to the default.) (p. 138)
The input selector on the VCR is not set correctly.
m Set the selector to DV input position. If you use
another DVCAM camcorder, set the power switch to
VTR.
The camcorder is connected to DVCAM equipment of
other than Sony.
m Operate normal editing.
Setting program on a blank portion of the tape is
attempted.
m Set the program again on a recorded portion.
Others
Symptom
No function works though the power is
on.
DV synchro-editing does not function.