Filter
Top Products
98
Recording an image from a mini DVCAM tape
as a still image
This camcorder can read moving picture data recorded on a mini DVCAM tape and record it
as a still image on a “Memory Stick” or a PC card. The unit can also take in moving picture
data through the input connector and record it as a still image on a “Memory Stick” or a PC
card.
Before operation
•Insert a recorded mini DVCAM tape.
•Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card into the unit.
(1) Set the POWER switch to VTR.
(2) Press ·. The picture recorded on the mini DVCAM tape is played back.
(3) Keep pressing PHOTO lightly until a picture from the mini DVCAM tape freezes.
“CAPTURE” appears on the LCD screen or in the viewfinder. Recording does not
start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
“Memory Stick” or a PC card. The recording is complete when the bar scroll
indicator disappears.
When the access lamp is flashing
Never shake or strike the unit. As well do not turn the power off, eject a PC card adaptor/PC
card or remove the battery pack. Otherwise, the image data breakdown may occur.
1
POWER
OFF
CAMERA
MEMORY
VTR
2
PLAYREW FF
3
PHOTO
4
PHOTO
CAPTURE