Sony DSR-PD100AP Camcorder User Manual


 
135
Additional information
Specifications
Digital Camcorder
System
Video recording system
Two rotary heads, Helical scanning
system
Audio recording system
Rotary heads, PCM system
Quantization: Fs 32kHz (12bits,
stereo 1, stereo 2), Fs 48kHz (16bits,
stereo)
Video signal
DSR-PD100A: NTSC color, EIA
standards
DSR-PD100AP: PAL color, CCIR
standards
Usable cassette
Mini DVCAM cassette with logo
printed
Tape speed
DSR-PD100A: Approx.
28.218 mm/s
DSR-PD100AP: Approx. 28.246
mm/s
Recording/playback time
40 minutes (PDVM-40ME)
Fast forward/rewind time
Approx. 2 min. 30 s (PDVM-40ME)
Image device
3CCD (Charge Coupled Device
1/4”)
Viewfinder
Electric viewfinder (color)
Lens
Combined power zoom lens, 48x
(Digital), 12x (Optical)
Focal distance
f =4.3 to 51.6 mm (
3
/16 to 2
1
/8 in.)
(41.3 to 496 mm (1
11
/16 to 19
5
/8 in.)
when converted into a 35 mm still
camera)
F 1.6 – 2.8
TTL autofocus system inner focus
wide macro system
Color temperature
Auto, One push, eIndoor
(3200K), WOutdoor (5800K)
Minimum illumination
4 lux at F 1.6
Illumination range
4 to 100,000 lux
Recommended illumination
More than 100 lux
LCD screen
Picture
3.5 inches measured diagonally
72.4 x 50.4 mm (2
7
/8 x 2 in.)
On-screen display
TN LCD/TFT active matrix method
Total dot number
184,580 (839 x 220)
Input and output
connectors
S VIDEO input/output
Input/output auto switch
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
Chrominance signal: 0.286 Vp-p
(DSR-PD100A), 0.3 Vp-p (DSR-
PD100AP), 75 ohms, unbalanced
Audio/Video input/output
Input/output auto switch
AV MINI JACK, 1 Vp-p, 75 ohms,
unbalanced, sync negative
327 mV, (at output impedance
more than 47 kilohms)
Output impedance with less than
2.2 kilohms/Stereo minijack
(ø 3.5mm)
Input impedance more than
47 kilohms
DV input/output
4-pin special connector
Headphones
Stereo minijack (ø 3.5 mm)
MIC input
Stereo minijack (ø 3.5mm):0.388mV,
DC2.5V
Input impedance 6.8 kilohms
lLANC jack
Stereo miniminijack (ø 2.5 mm)
General
Peak inrush current
(1) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
6.3 A (230 V)
Power requirements
7.2 V (battery insertion input)
8.4 V (DC IN jack)
Average power consumption
4.3 W during camera recording
using viewfinder
5.3 W during camera recording
using LCD screen
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Dimensions
Approx. 93 x 112 x 193.5 mm (w/h/
d) (3
3
/4 x 4
1
/2 x 7
5
/8 in.)
Mass
Approx. 900 g (1 lb 16 oz) excluding
the battery pack and the cassette.
Approx. 985 g (2 lb 3 oz) including
the XLR adaptor
Approx. 1.28 kg (2 lb 13 oz)
including the XLR adaptor, wide
conversion lens and wide
conversion lens hood.
Microphone
Electret condenser microphone,
Stereo type
Speaker
Dynamic-speaker
Supplied accessories
See page 7.
AC power adaptor
Power requirements
100 to 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in operating
mode
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Dimensions (Approx.)
125 x 39 x 62 mm (w/h/d) (5 x 1
3
/16 x
2
1
/2 in.)
Mass (Approx.)
280 g (9.8 oz) excluding power code
PC card adaptor
Host interface
PC card ATA/True IDE standards
Operating voltage
3.3 V/5V
Operating environment
0°C to 60°C (32°F to 140°F) (non-
condensing)
Dimensions (Approx.)
85 x 54 x 5 mm (w/h/d) (3
3
/8 x 2
1
/4
x
7
/32 in.)
Mass (Approx.)
30 g (1 oz)
“Memory Stick”
Memory type
Flash memory (4 MB)
Voltage
2.7 to 3.6 V
Power consumption
About 4.5 mA
About 130 µA at standby
Clock
Maximum 20 MHz
Operating environment
0°C to 60°C (32°F to 140°F) (non-
condensing)
Dimensions (Approx.)
21.5 x 50 x 2.8 mm (w/h/d) (
7
/8 x 2 x
1
/8 in.)
Mass (Approx.)
4 g (0.2 oz)
Design and specifications are subject
to change without notice.