Filter
Top Products
Chapter 2 Operation 29
(GB)
Chapter 2
12P CONNECTOR
Switches the input and output of the DC IN/VBS
connector (12-pin). Selects the output signal from this
connector when OUT is selected.
VBS lock
Appears only when an external reference sync signal (VBS
signal) is input. Adjusts the horizontal phase and SC
(subcarrier) phase to synchronize the camera operation with
the reference signal.
Selection
IN
OUT
Function
Functions as the input connector.
Functions as the output connector.
Select the output signal with the SIGNAL setting.
HD/VD: Outputs the HD/VD signal.
C. SYNC: Outputs the composite sync signal.
Selection
H.PHASE
SC.PHASE
ROUGH
SC.PHASE
FINE
Function
Adjusts the horizontal phase within the range from
–20 to +127.
Roughly adjusts the subcarrier phase by setting to 0°
or 180°.
Finely adjusts the subcarrier phase within the range
from –127 to +127.
HD/VD lock
Appears only when an external reference sync signal (HD/
VD signal) is input. Adjusts the horizontal phase to
synchronize the camera operation with the reference signal.
Select H.PHASE, then adjust the level within the range from
–20 to +127.