Sony HDMS-S1D Digital Photo Frame User Manual


 
69
Additional Information
Notes on using “Memory Stick”
If you set the write-protect switch to
“LOCK,” data cannot be recorded,
edited, or erased.
Do not remove a “Memory Stick”
while reading or writing data.
Data may be damaged if:
– You remove a “Memory Stick” or turn off
the unit while reading or writing data.
– You use a “Memory Stick” in a place where
susceptible to static electricity or electric
noise.
We recommend that you make a
backup copy of important data.
Do not touch the terminal of the
“Memory Stick” with your fingers
or metallic objects.
Do not bend, drop, or impact a
“Memory Stick.”
Do not disassemble or modify a
“Memory Stick.”
Keep a “Memory Stick” away from
water.
Do not use or store a “Memory
Stick” under an unfavorable
condition as below:
– Extremely hot place (such as in a parked car
with windows closed in summer, or a spot
under direct sunlight)
– Humid place
– Place near corrosive substances
If you format a “Memory Stick” in
which data has been already written,
all the data and software will be
erased. Be careful not to mistakenly
erase any important data.
Label area
Terminal
Write-protect
switch
Notes on using “Memory Stick
Duo”
When you use a “Memory Stick
Duo” without a write-protect switch,
be careful not to edit or erase
important data by mistake.
When you use a “Memory Stick
Duo” with a write-protect switch,
data cannot be recorded, edited, or
erased by
setting the switch to
“LOCK.”
Use an object with a sharp tip to
move the write-protect switch.
Do not press on the memo area
strongly when writing.
Carry and keep a “Memory Stick” in
its original case.
Terminal
Write-protect
switch
Memo area