Filter
Top Products
65
Customizing Your Camcorder
Select [ON] to adjust the white balance to
the desired setting using / .
and the setting value appear when [WB
SHIFT] is anything other than the default
setting.
z Tips
• When the white balance is set to a lower value,
images appear bluish, and when set to a higher
value, images appear reddish.
• You can also adjust the setting manually using
the camera control dial (p. 35).
When using either the NightShot (p. 34) or
[SUPER NIGHTSHOT] (p. 82) function to
record, you can record clearer images by
setting [NIGHTSHOT LIGHT], which
emits infrared light (invisible), to [ON] (the
default setting).
b Notes
• Do not cover the infrared port with your fingers
or other objects (p. 34).
• Remove the conversion lens (optional).
• The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
When recording with SD (standard
definition) image quality, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
B16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
4:3 ( )
Records images to the full screen on a 4:3
TV screen.
b Notes
• Set [TV TYPE] correctly according to the TV
connected for playback (p. 74).
You can select the maximum zoom level in
case you want to zoom to a level greater
than 10 × (the default setting) during
recording. Note that the image quality
decreases when you use the digital zoom.
BOFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
80 × (HDR-UX3E/UX5E)
Up to 10 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural.
WB SHIFT (White
Balance Shift) (HDR-
UX7E)
NIGHTSHOT LIGHT
WIDE SELECT
DIGITAL ZOOM
STEADYSHOT
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
Continued ,