Filter
Top Products
92
Troubleshooting (Continued)
The indicators of the disc type and
the recording format on the LCD
screen are grayed out.
• The disc may have been createdwith a
device other than your camcorder. You can
play back the disc with your camcorder,
but you cannot record additional scenes.
You cannot operate functions using
the “Memory Stick Duo.”
• If you use a “Memory Stick Duo”
formatted on a computer, format it again on
your camcorder (p. 60).
You cannot delete images, or format
the “Memory Stick Duo.”
• The maximum number of images that you
can delete on the index screen at one time
is 100.
• You cannot delete the images protected on
another device.
The data file name is incorrect or
flashing.
• The file is broken.
• Use the file format that is compatible with
your camcorder (p. 105).
Refer also to “Discs/“Memory Stick Duo””
(p. 91).
Pressing START/STOP does not
record movies on the disc.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 31).
• Your camcorder is recording the scene you
have just shot on the disc.
• The disc has run out of space. Use a new
disc or format the disc (DVD-RW/
DVD+RW only, p. 59). Or delete the
unnecessary images (p. 45).
• When you are using one of the following
discs after finalizing it, make the disc to be
able to record additional scenes (p. 61). Or
use a new disc.
–DVD+RW
–DVD-RW recorded with HD (high
definition) image quality
–DVD-RW (VIDEO mode) recorded with
SD (standard definition) image quality
• The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
• Moisture condensation has occurred with
the disc. Turn off your camcorder and
leave it for about 1 hour in a cool place
(p. 108).
You cannot record a still image.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 31).
• The “Memory Stick Duo” has run out of
space. Use a new “Memory Stick Duo” or
format the “Memory Stick Duo” (p. 60). Or
delete the unnecessary images (p. 46).
• You cannot record a still image together
with:
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
• You cannot record a still image on a disc
on your camcorder.
The ACCESS lamp lights up even
when you stop recording.
• Your camcorder is recording the scene you
have just shot on the disc.
The recording angle looks different.
• The recording angle may look different
depending on the mode of your camcorder.
This is not a malfunction.
The flash does not work.
• You cannot record with the flash with:
–Capturing still images while shooting a
movie
–The conversion lens (optional) attached
Recording