Filter
Top Products
62
Table of Contents Useful Recording Techniques Index
Creating a disc with a
DVD writer, recorder
Creating a disc with the dedicated
DVD writer, DVDirect Express
You can perform the following operations
by using the dedicated DVD writer,
DVDirect Express (sold separately):
Create a disc of the same image quality as that
of the recorded movie.
Convert high definition image quality (HD)
movies to standard definition image quality
(SD) movies, for playback on any DVD
player, etc., and create a disc (DISC BURN
OPTION).
Play back the images on a created disc.
Refer also to the instruction manual
supplied with the DVD writer.
DVDirect Express is referred to as “DVD
writer” in this section.
Only unused discs of the following types can
be used:
12cm DVD-R
12cm DVD+R
The device does not support two-layered discs.
Turn on your camcorder, and
connect the DVD writer to the
(USB) jack of your camcorder with
the USB cable of the DVD writer.
The [EXTERNAL DRIVE] screen
appears on the camcorder screen.
Notes
Use the supplied AC Adaptor as the power
s
ource (p. 20). When using battery power, the
DVD writer does not work.
When there are unsaved high definition (HD)
and standard definition (SD) image quality
movies, they will be saved on individual discs
according to the image quality.
Insert an unused disc into the
DVD writer, and close the disc
tray.
The [DISC BURN] screen appears on
the camcorder screen.
Press
(DISC BURN) on the DVD
writer.
Movies recorded on the internal
memory that have not been saved on
any discs will be recorded onto the
disc. After the disc has been created,
the disc tray on the DVD writer opens
and you can remove the disc.
You can also operate with (DISC
BURN) on your camcorder.
Repeat steps 2 and 3 when the
total memory size of movies to
be burnt exceeds that of the disc.
After the operation is completed,
touch
[END] on the
camcorder screen.
Touch [EJECT DISC] and remove any
inserted disc.
Close the disc tray on the DVD
writer, and disconnect the USB
cable.