Filter
Top Products
Chapter 2 Basic Operations
2-10 Chapter 2 Basic Operations
Playback
Search speed
The maximum search speed depends on Recording mode which was
specified for recording.
The fewer cameras for recording, the longer the recording cycle, and the
lower the image quality mode, the higher the speed at which you can
monitor the playback picture.
Note
If you try to search before the tape top or after the tape end, a message “No
playback data” is displayed. The same message appears also if you try to
search before the recording starting point or after the ending point on the
hard disk.
Dividing structure of the playback screen
In the same manner as when monitoring, the screen can be divided into 16
divisions at maximum, and you can assign a camera to each division as
desired.
The camera assignment for playback can be made independent from that
for monitoring.
See “Monitoring Picture” (page 2-3) for the screen dividing structures, and
Chapter 5 “Connections and Prepartions” for the camera assignment.
Monitoring the playback picture and the current camera inputs
simultaneously
You can assign live camera inputs to some divisions of the playback
screen.
You can view the current picture of the assigned camera in addittion to the
playback pictures.
Time Search
Using the date/time data recorded on a tape, you can locate the picture for
any specified date and time.
1 Insert the recorded cassette.
S
DIGITAL SURVELLANCE RECORDER HSR-1
DIGITAL
TIMELAPSE
CONTROL-S
REC
EJECT
FRAME STOPFRAMEREC
F FWDPLAYREW
‚
§
·º
¶π® æ
LOCK
TIME
SEARCH
ALARM
SEARCH
CURSOR
MENU
SET/YES
RESET/NO
†
10
◊
√
ı ∫
1234
5678
9
13
42