Filter
Top Products
Chapter 4 Menu Operations
4-4 Chapter 4 Menu Operations
To display the basic items only
The menu is set to Enhanced grade at the factory to
display both the basic and enhanced items.
To display the basic items only, proceed as follows:
1 Highlight MENU GRADE (or display “Menu
grade”) on the Top menu by pressing the V or v
key.
Monitor display
SETUP MENU
IMAGE CONTROL MENU
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
MENU GRADE : ENH m
LANGUAGE : ENG
Character display
Menu grade
2 Proceed to the next layer by pressing the b key.
3 Select BASIC (or display “Basic”) by pressing the
V key.
Monitor display
SETUP MENU
MENU GRADE : ENH
M BASIC
*
ENHANCED
Character display
>Basic
4 Press the SET key.
The message “NOW SAVING” is displayed, and
the enhanced items will not be displayed when you
activate Menu mode the next time.
Returning to the Default Settings
– Initializing
To restore the factory (default) settings for the menu
items (initialize the items) after having changed them,
proceed as follows.
1 Highlight MENU INITIALIZE (or display “Menu
Init”) on the Top menu by pressing the V or v key.
The MENU INITIALIZE display appears.
MENU INITIALIZE
INIT EXCEPT PARALLEL
INIT INCLUDING PARALLEL
(WARNING)
IF YOU INIT PARALLEL,
PLEASE CHECK A CIRCUIT
CONNECTING PARALLEL I/O
CHANGE: µ
INIT: SET ABORT: MENU
2 Specify whether to initialize the menu except the
parallel input/output settings or to initialize the
menu including the parallel input/output settings.
Note that the parallel input/output settings include
those to specify the output signal voltages.
Connected external circuits can be damaged if
these settings are improperly changed.
3 Press the SET/YES key.
The specified item is returned to the default setting.
Menu Operations