Filter
Top Products
43
Applications
Connecting camera and flash by
cable
Using the off-camera cables FA-CC1AM (optional) allows photography
with flash units separate from the camera. Up to four flash units can be
connected together. Being able to take photographs without having to
consider the positioning of the flash unit provides considerable freedom to
create a variety of shadow effects on the subject.
• Flash units with accessory terminals can be connected directly.
1 Remove the terminal cap.
2 Plug the cable into the accessory terminal.
• In this mode, ADI metering will be canceled and Pre-flash TTL
metering will be used automatically (p. 34).
• High-speed sync in the P mode cannot be used when the flash is
connected with the off-camera cable FA-CC1AM (optional).
• All the flash units are at the same power level.