Filter
Top Products
54
3 Press the mode button.
• The data panel returns to the original display.
• When a setting other than the default setting is selected in custom 3,
4 or 5, remains on the data display.
• After changing the wireless flash channel (see 1. Wireless channel
setting), attach the flash to the camera, and press the shutter button
partway down to transmit the flash channel information to the
camera.
• When “All modes” is selected (see 5. Recording modes in which
manual flash and multiple flash may be set), manual flash and
multiple flash photography may be used in all recording modes.
* The proper exposure may not be obtained with photography in
modes other than the M mode, and use of the M mode is therefore
recommended.
• The selected settings are maintained even when the flash unit is
turned off, or the battery is removed.