Sony HVL-F60M Camera Flash User Manual


 
GB
38
Adjusting the illuminating light
(LED light) (built-in diffuser,
color conversion filter)
Using a built-in diffuser reduces glare and softens light. It can also lessen unnatural
multiple shadows.
Using a color conversion filter lets you change the color temperature to about
3,200K (at maximum brightness).
Using the built-in diffuser
Firmly pull the handle of the built-in diffuser down to the bottom of the window
and attach it. When storing, pull the handle up into the main body.
Using the color conversion filter
Align the clips on each side of the color conversion filter with the rim of the LED
light and press the color conversion filter on.
To remove the color conversion filter, hold the protrusions on each side and pull it
off.