Filter
Top Products
92
HVR-A1U/A1N 2-639-667-13(1)
Troubleshooting (Continued)
appears on the LCD screen.
• This appears when you play back a tape recorded on other recording devices using a 4ch
microphone (4CH MIC REC). This camcorder does not comply with the 4ch microphone
recording standard.
Remote Commander
The supplied Remote Commander does not function.
• Set [REMOTE CTRL] to [ON] (p. 65).
• Remove any obstructions between the Remote Commander and the remote sensor.
• Point the remote sensor away from strong light sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander may not function properly.
• Insert a new battery. Insert a battery into the battery holder with the +/– polarities correctly
matching the +/– marks (p. 114).
• Remove the conversion lens (optional) as the remote sensor may be obstructed by it.
• You cannot use the ZERO SET MEMORY button with your camcorder.
Another VCR malfunctions when you use the supplied Remote Commander.
• Select a commander mode other than VTR 2 for your VCR, or cover the sensor of your VCR
with black paper.
Menu
Menu items are grayed out.
• You cannot select grayed items in the current recording/playback situation.
You cannot use [PROGRAM AE].
• You cannot use [PROGRAM AE] together with:
– NightShot
– [COLOR BAR]
– [OLD MOVIE] of [D.EFFECT]
– TELE MACRO
– [COLOR SLOW S]
– When the AUTO LOCK switch is set to ON (p. 25)
You cannot use [SPOT METER].
• You cannot use [SPOT METER] together with:
– NightShot
– [COLOR BAR]
– [COLOR SLOW S]
– When the AUTO LOCK switch is set to ON (p. 25)
• If you set [PROGRAM AE], [SPOT METER] is automatically set to [AUTO].